AS 1020 YAK 2WD

The robust ride-on flail mower AS 1020 YAK 2WD is made for tough use on flat terrain with slight inclines. The ride-on mower shreds extensive green areas, growth up to 1.50 metres, undergrowth and young scrub effortlessly and reliably. This makes this flail mower suitable for professional use by service providers, local authorities and garden and landscaping contractors. Except for the 2WD rear wheel drive, it is identical in construction to its 4WD steep slope brother, the AS 1040 YAK 4WD.

The AS 1020 YAK 2 WD is powered by a professional Vanguard V-Twin engine. The horizontal engine delivers a maximum of 23 hp (17.2 kW) at 627ccm displacement and transmits the power via V-belts directly to the flail shaft. Optimum clean engine air supply is ensured by the cyclone air filter.

Thanks to the hydrostatic drive, the ride-on flail mower can be steered comfortably and continuously in the range of 6.8 km/h forwards and 6.3 km/h backwards. The rear axle differential can be locked at any time by foot pedal. Driving is simple and comfortable using the hand control lever. The automatic parking brake and the cruise control function are also integrated in the drive lever. For safety reasons, the machine also has an emergency brake pedal for the right foot, just like a passenger car.

The mowing deck with 56 Y flails and a working width of one metre creates area outputs of up to 6,800 m²/h. The cut material is deposited as a mulch layer evenly over the entire working width. The cutting finish, even with very high vegetation, is visually homogeneous and attractive. 7 levels are available for adjusting the cutting height from 30-110 mm. The pendulum suspension of the mowing deck allows it to move upwards when sitting on the sides or when applying high force to the blades (surfing mowing deck). Damage to the cutting deck, rotor and flails is thus prevented as far as possible. The asymmetrical arrangement of the mowing deck enables efficient mowing of edge areas and obstacles.

The ergonomic and upright sitting position in the machine ensures ample legroom for operators up to 1.95 m tall. The bucket seat can be adjusted in length to suit any user. The innovative seat-suspension system with end position damping is also individually and continuously adjustable to suit every operator. In addition, all operating elements are logically arranged and conveniently accessible. Aluminium side panels protect the driver’s hands from thorns and undergrowth. Liquid anti-puncture protection „AS-Plattfuss-Stop“ in every wheel reliably prevents flat tires.